Material Handling Products and Installation Services

MD Series Mechanical Dock Leveler Capacities:

HD Series Hydraulic Dock Leveler Capacities:

25,000 lb.
27,500 lb.
30,000 lb.
35,000 lb.
40,000 lb.
45,000 lb.
50,000 lb

Just give us a specification for your requirement.

Levelers are semi-automatic  with no manual lifting required. "Easy Float" hold-down design requires a maximum of 8 lbs. of release force. The hold-down device is to maintain lip contact with the vehicle bed by allowing the leveler to float with the suspension of the truck/trailer. A high-strength braided nylon strap is used to connect the deck and frame assemblies and to absorb shock loads. The extended lip retracts if impacted during trailer/ truck positioning. All adjustments are conveniently located in the front frame. The unit is supplied to with operating range toe-guards and automatic night-locks. The lip hinge is full width piano style with full width hinge pin. The deck is designed to allow up to 4" of lateral deck compensation to accommodate canted truck/trailer beds.  Each unit is supplied with (2) molded rubber dock bumpers and a maintenance support bar. Standard color for all Dock Levelers is gray.

Options:

 Levelers are fully hydraulic with a wall mounted push-button control station. The power unit is a 1.5 h.p. TENV self-contained unit installed on the dock leveler frame. You specify the power requirements (volts/phase/hz).   All hydraulic functions  are controlled by the Pentalogic hydraulic manifold. The lip plate is self-retracting. The rear hinge design is full width and fixed. The unit is supplied to with full- range toe-guards, hydraulic fall-safe,  and automatic night-locks. The lip hinge is full width piano style with full width hinge pin. The deck is designed to allow up to 4" of lateral deck compensation to accommodate canted truck/trailer beds.  Each unit is supplied with (2) molded rubber dock bumpers and a posi-lock maintenance support bar. Standard color for all Dock Levelers is gray.

Options: